Launching 2027

Every sauna starts with stone.

Stone holds the heat. Akmo commands it, from the dial, the app or your smart home. Walk in to a hot room, every time.

Join the first batch

For 6 kW electric heaters with external control. UK and EU.

  1. It wakes. Switch on, and Akmo checks itself before anything else.
  2. It waits. Room temperature, your last settings, one button.
  3. Press. Look in. Before any heat, Akmo asks you to open the door and check the room.
  4. Turn for heat. One click, one degree.
  5. Press. Turn for time. Five minutes a click.
  6. Press. Press again. The first press picks START. The second starts the heat.
  7. Go and do something else. The ring fills as the room warms. Sped up here.
  8. Eighty degrees. In you go. Session one starts by itself.
  9. The heat holds. The clock runs. In, out, back in: Akmo keeps your temperature until your time is up.
  10. Another round? Press for session two, or leave it: it switches itself off.
  11. Off. By itself. The heat ends on its own.

The dial

Turn the dial. Feel the heat.

No menus to dig through. No tiny buttons to press with wet hands. Turn for heat, press, turn for time: you will have learned it in the time it takes to read this.

Or set it from your phone. The Akmo app, now in development, talks straight to the dial over your home Wi-Fi. Starting it from anywhere is coming.

See it work

The dial showing a new session: temperature 80 degrees selected, session 45 minutes, and a start button
Set itTurn for heat, press, turn for time.
The dial while heating up: 52 degrees, session starts at 80
Leave itThe ring fills as the room warms.
The dial during a session: room temperature and time left
Enjoy itHeat held, time counting down.

Nothing live on your wall

One slim low-voltage cable runs to the panel. Every volt of mains stays locked in the controller's steel case, out of sight.

Dial, app or smart home

Run it from the dial or, at home, from the Akmo app (in development). Akmo is compatible with Apple Home, Google Home, Home Assistant and other Matter platforms: start, stop and watch it from there; set heat and time at the dial. And when the internet dies, the dial does not care.

Keep the heater you love

Akmo is made to work across heater brands. If yours takes a separate control unit and sits within Akmo's limits, Akmo can run it. We check your model from its manual first, and a qualified electrician installs it to both manuals. Check yours.

The Akmo panel seen from the side, its black ring standing proud of the wall

Safety

Built for the day the software is wrong.

Apps crash. Updates break things. So the last line of safety is not left to software: the overheat limiter, the door check at start, the four-hour timer and the watchdog are wired into the controller, where no bug can reach them.

  • Too hot? The limiter cuts the power itself. It asks nobody.
  • Door open? Then it will not start. Not from the dial, not from your phone.
  • Forgotten? A hardware timer cuts the heat within four hours of switching on.
  • Worn relay? The controller tests its safety relays every time it is switched on, and again before any remote start.

Why you can trust it

  1. Turn to Settings. Everything lives on the dial.
  2. Smart integrations, Matter, Commission. Three presses from Settings.
  3. Scan the code. Open your smart home app and add a device. Bluetooth on.
  4. Paired. Your sauna is in your home, beside your lights and heating.

Smart home

Scan once. Your sauna joins your home.

No Akmo hub to buy. Akmo is built on Matter, so it joins the smart speaker or hub your home already has, straight from the dial.

Matter compatible. Your phone needs Bluetooth on for pairing.

The system

The beautiful part on the wall. The serious part behind it.

Diagram: the panel connects by one cable to the controller, which connects to the heater, the temperature sensor and the door sensor

Be first

Be one of the first to turn it.

The first batch will be small, and the people on this list get it first, at the launch price. Until then: one honest email a fortnight from the workbench.

Close-up of the panel's matt black ring and screen

Why Akmo

Named after the heart of the room.

In a Lithuanian pirtis the stones are the heart of the room: they take the fire, hold it, and give it back slowly. Akmo is named after them (akmuo, stone), and built to be as quiet and as dependable.

The story

The Akmo panel on a timber sauna wall