Compatibility
Keep the heater you love.
You chose your heater for the heat it gives. Choose how you control it just as freely: Akmo is made to work across heater brands.
Akmo-6kW is for you if your heater
- is electric and made for a separate (external) control unit;
- has three heating elements of 2 kW each (6 kW in total), each with its own terminal, and a neutral terminal;
- runs on a single-phase 230 V supply, on its own circuit as the heater's manual specifies;
- has a manual that allows a separate temperature sensor with a 125 °C overheat limiter: the one in the Akmo box, fitted where that manual puts the sensor.
Stay inside these limits. Akmo-6kW must only be used with heaters that meet every point above. A heater outside them must not be connected. The sensor goes exactly where your heater's manual puts its sensor; nowhere else.
Not sure? Tell us the model when you join the list. We will read its manual so you do not have to.
Not yet for
- heaters with built-in controls on the heater itself;
- wood-burning and infrared saunas;
- three-phase supplies or heaters above 6 kW, for now;
- smaller heaters, or other element sizes, until we have tested them.
The name is the limit: Akmo-6kW switches up to 6 kW. Bigger heaters get the same dial with a stronger controller, and those come next.
Running today on
One heater so far, and we will not pretend otherwise: a 6 kW external-control heater from a leading Finnish maker, running the founder's own sauna. Every model we test before launch will be named here.
Everything in one box
The dial
The round touchscreen panel for your wall.
The controller
Steel, serious, and full of the electronics that switch and protect.
The senses
Temperature sensor with overheat limiter, and a door sensor.
The rest
The panel cable, a short manual for you and a thorough one for your electrician.
The numbers
| Heater power | 6 kW: three 2 kW heating elements, each with its own pair of relays |
|---|---|
| Supply | 230 V single phase |
| Temperature setting | 60 to 100 °C |
| Heating limit | 3 h 50 min a visit, with a hardware cut-off at 4 hours |
| Panel | 2.1" round touchscreen, 480 × 480, with a rotary dial; about 79 mm across |
| Panel connection | One network-type cable to the controller, 24 V and data (not a computer network) |
| Wireless | Wi-Fi. Matter compatible |
| Controller | Steel, about 300 × 300 × 75 mm, wall mounted outside the sauna |
| Sensors | Temperature sensor with resettable overheat limiter; door sensor; optional second door sensor |
| Load | About 8.7 A per element, 26 A in total at 6 kW |
| Switching | Two relay breaks in series on every element feed; neutral not switched |
| Low voltage | 24 V PELV from a certified mains power supply (IEC 62368-1), fused per branch |
| Supply circuit | Typically a 35 A circuit in 10 mm² cable with a double-pole isolator; your electrician confirms it |
| Mounting | Outside the sauna, indoors, with its ventilation holes clear |
| Installation | Controller wired by a qualified electrician; manuals for the user and the installer included |
| Standards | Designed to EN 60335-2-53 (sauna heater controls) and EN 60335-1 (household appliance safety); not yet independently tested |
Prototype figures. They may change before production.
Be first
Be one of the first to turn it.
The first batch will be small, and the people on this list get it first, at the launch price. Until then: one honest email a fortnight from the workbench.